Comments on: KSC CZ75 Version 2 Review

By: Christiana Banegas

Christiana Banegas — Sat, 03 Dec 2011 08:44:57 +0000

This was EXTREMELY helpful, thank you. I haven’t come across another article so detailed and yet so simple.

By: Brandon

Brandon — Wed, 24 Nov 2010 23:11:19 +0000

I sure do know who this is. Welcome, as hell!

I handled your KWA CZ a few months back and remember being extremely impressed by the new KWA version. My KSC got alot of low marks for the poor quality on some of the controls (IE my safety, which simply fell from the gun after enough use, and like you mention above, the silly hopup. I’m a big .2 user, so when I was unable to get anything to fly straight, it got the ‘over the back fence’ treatment. It really came to a point when Mike and I were having a pistol match outside, and I had to point the gun at a 45 degree angle to the ground to hit him. I’d love to see the KWA’s shooting dynamics to see if series 7 internals have fixed anything.

Again, good to see you around C. Let me know if you ever want to contribute, I’ll make sure you get published.

By: Curses

Curses — Wed, 24 Nov 2010 08:46:30 +0000

You know who this is. Didn’t know if you were aware, but my new main gun is a kwa cz75. Next time we meet I would be willing to let you try it out in a game or two. Personally it is one of the most accurate GBB I have fired, as long as you use .25s. hop up is so strong that with it all the way down .25s fly on a straight plain. The gun is all metal except for the outer barrel and front site, and feels solid. If you’ve ever handled a CZ you know they fit your hand like a glove. Markings aren’t that realistic with a big “KWA” on one side and “KZ75 cal. 6.00mm” on the other. It does come with a serial number below the KWA markings. I highly recommend this gun to collectors and skirmishers alike.
side note: you have to pull back the slide to cock it properly, if you just pull back the hammer it won’t cycle fully.

By: Brandon

Brandon — Mon, 25 Oct 2010 03:06:23 +0000

I believe KSC did have a brief run of factory full metal guns, but they were way before NS2, and pretty far back IIRC. The KWA NS2 CZ was awesomely impressive when I testfired it at our field. I’d love to review one.

By: MikeG

MikeG — Sun, 10 Oct 2010 13:33:33 +0000

The version number designates the cut of the slide and the finish of the body. To my knowledge, KSC never produced a full metal CZ. Recently KWA released a full metal CZ based on the NS2/System7 gas system. I believe there was also a metal body kit produced by Zeke for the KSC.

By: trueblue

trueblue — Sun, 10 Oct 2010 12:17:30 +0000

I’m rather confused, the first photo shows a KSC Cz75 Second Version which I thought a full metal version. Is the sample you reviewed a Japan version with ABS body, but a “second version” nevertheless?